Category Archives: Atari

DIY Joystick/Mouse extension cord

Gamepads from previous article have pretty short cable, unless you’re going to have computer in your lap. All in all not really practical. So, next step is making extension cord.

Basically it’s simple, connect corresponding pins on two connectors (pin 1 from one to pin 1 from the second and so on). Connectors are not the problem, you’ll need one female and one male DB9 connector. They’re pretty standard thing in electronics shop, and there’s bunch of them on ebay.

The real problem is the cable. Joystick connector has 9 pins, that means we’ll need (at least) 9 pin cable, that’s where I got stuck. Here in Croatia there aren’t that many electronics shops and I haven’t found similar cables in shops that sell tools and similar stuff. Problem is that they’re kinda pricey. I’ve found 10 wire round cable but price was almost $3 per meter (one meter is 3.28 feet, you can round it to 3 feet for easier math 🙂 ) . I planned to make two cables of at least 2 meter in length (cca 6 feet), that would make $12 just for the cable. There are cheaper ones, but they’re flat cables and that doesn’t look that practical.

Read the rest of this entry

Advertisements

Cheapo Sega gamepad mod

These days it’s getting hard to find joysticks or gamepads that would work on Amiga, Comodore 64/128 and the rest of the compatible computers. Of course, you can find used ones on ebay and like, but from what I’ve seen most are pretty banged up and/or expensive so I don’t consider them a thing to be relied upon.

Sometimes you can stumble upon new ones, so called NOS, New Old Stock, or if some company makes a series for vintage fans, but again, any option is pricey. In my opinion that makes sense for collection, so you can have everything nice and shiny for display. But if you intend to use it cheaper, more replaceable, stuff would be nice.

 

But luckily there is cheap alternative. Sega Mega Drive 1, 2, 3 (basically the same console) or Sega Genesis as it was called in North America. It uses the same 9 pin DB9 connector as these Commodore computers. They can even work out of the box on them but it’s highly discouraged. Especially in Commodore 64 case where they can kill it.  I’ve seen few versions, for starters I ordered cheapest ones I found on ebay. Price is about $6 for two. They even came in boxes, I expected just the plastic bag 🙂 .

 

Packaging

Packaging

Read the rest of this entry